|
In-Situ Fluorometer for Oil Detection |
| OilSys
- Enviroflu-HC is a new generation of highly sensitive
submersible sensors for oil-in-water measurement |
|
|
|
| The
UV fluorescence principle, used for detection, is much more
sensitive than any other existing detection principle, like
infrared scattering, etc. This allows the detection of very
low levels of PAH (single ppb levels) for use in drinkingwater
or condensate applications. Typical applications are discharge
monitoring of airports and factories, leakage detection and
many others. The sensors can be used either in stationary
or portable applications. A new innovative coating on the
lenses helps prevent the optics from fouling. This together
with the air cleaning option makes the enviroFluHC very robust
and deployable for long periods of time. |
|
| FEATURES
|
-
miniaturized
design
-
RS232 interface
-
0..5VDC interface
-
Ø 4..20mA interface
-
high sensitivity
-
low power consumption
|
-
low
cost
-
electronic daylight compensation
-
fast acquisition
-
RS232 auto power down, if not connected / used
-
newest anti fouling technology with nanocoating
-
Air cleaning option
|
| BENEFITS
|
|
- No
frequent calibrations needed
- Detects
many hydrocarbons
|
| APPLICATIONS
|
- drinking
water
- waste water
- airport
monitoring
- cooling
water
|
- desalination
- refineries
- pipeline
leakage detection
- bilge water
monitoring
|
| SPECIFICATIONS
|
Light
source: miniature Xenon-flash lamp with interference filter
(peak wavelength 254nm, 25nm FWHM) Output energy controlled by internal
reference diode
Detector: UV photodiode with interference filter
(peak wavelength 360nm, 50nm FWHM)
Ranges (calibrated to Phenanthren solution)
enviroFlu-HC 500: 0..50ppb and 0..500ppb
enviroFlu-HC 5000: 0..500ppb and 0..5000ppb
auto ranging (only with RS232) or pre-set
Detection limits: 0.1ppb (in pure water)
Values can be transformed to total-oil concentrations giving typical
detection ranges of uo to 200ppm total oil
Interfaces:
RS232
0..5VDC
4..20mA
Voltage: 9..36VDC
Housing: seawater resistant plastic and stainless
steel (1.4571) or titanium
weight: approx. 1.8kg in air (stainless steel version)
size: 68 x 280mm (without connector)
Operation temperature: 0 - 40°C
Depth rating: 300m (deepsea version: 6000m
|
Versions:
enviroFlu-HC
500: 0..50ppb and 0..500ppb, stainless steel version
enviroFlu-HC 5000: 0..500ppb and 0..5000ppb, stainless steel version
enviroFlu-HC Ti 500: 0..50ppb and 0..500ppb, titanium version
enviroFlu-HC Ti 5000: 0..500ppb and 0..5000ppb, titanium version
enviroFlu-HC deepsea: deepsea version, titanium, depth rating:
6000m (available with both measuring ranges)
Accessories:
power supplies:
PS201
MERLIN handheld: only usable
with additional battery pack
flow through unit
HC-panel: PVC panel for installation of the enviroFlu-HC with flow
through unit and TriBox2
air cleaning head
safety armature for in pipe installation: PN16
TriBox 2
|
| Contact
Envitech or log on to our download
pages for the technical brochures |
|
| |
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
|
| ©
Envitech Ltd: 2009-2010 |
|
|
