Up-to-date
data processing
Data processing options of the photometers NANOCOLOR®
500 D and 400 D offer:
Large data memory for up to 999 measurement values (500
for the NANOCOLOR® 500 D)
- automatic
storage of all values or user-defined storage of specific
values via keypad
- memory
storage optional (e. g. for repeated measurements)
Traceability of measured values
- built-in
timer with date for data processing
- automatic
assignment of date and time for every stored
value
- optional
assignment of sample location and sample number for
every stored value
- clear
identification of values above or below the measuring
range for stored values
Free selection of individual values by method, sample
location, sample number, date and time
Interfaces:
|
|
Data
transfer to Windows® standard software:
NANOCOLOR® Photometer Data Export
The
fast availability and safe storage of analytical data
with
standard software is an important aspect in different
kinds
of laboratories. The programme NANOCOLOR ® Photometer
Data Export allows to transfer the data from the memory
of
the photometers NANOCOLOR ® 500 D, 400 D, Linus,
350 D, 300 D, 250 D and the luminometer BioFix®
Lumi-10 to a PC or receive measurements real-time online
from the photometers (not with LINUX).
Data storage
Data can be either exported directly into an EXCEL worksheet
or into an ACCESS data base. Because of the use of Windows®
standard software an easy further processing of the
data is guaranteed.
Recording
of calibration curves
The
program allows automatic construction of calibration
curves up to 4th degree and the calculation of all relevant
statistical parameters such as coefficient of variation,
standard deviation etc. and the preparation of calibration
protocols.
Minimum system requirements:
Microsoft Windows® 2000 or XP Service Pack 2, RS-232
or
USB interface, VGA resolution min. 1024 x 768, MS Excel
97
Ordering
information:
NANOCOLOR®
Photometer Data Export Cat. No. 919 02
Zero modem cable Cat. No. 919 680 |
