It provides an easy interface from Isco’s advanced 2100 Series Area Velocity Modules to data collection systems like SCADA/DCS or any other secondary instrument systems.

Standard Features

• Three independent, isolated outputs per module.
• Outputs are freely programmable for any parameter measured by Isco’s Area Velocity flow module.
• When more than one module is stacked, each output can be configured for any parameter for any module connected to the 2108.
• The 2108 Module can be mounted as far as 3,000 ft from other modules (an Isco Quick Disconnect is recommended to simplify the installation).
• Isco Flowlink 4.15 can interrogate any 2100 Series module through the 2108, eliminating the need for confined space entry.
  

• Size (H x W x D): 4.76 x 6.73 x 2.17 in (12.1 x 17.1 x 5.5 cm)
• Weight: 0.6 Kg
• Case Material: ABS /Enclosure Rating: NEMA 1, IP20
• Number of Analog Output Channels: 3

• Output range: 4 - 20mA*
• Maximum load resistance: 600 ohms
• Isolation: Output galvanically isolated from DC power, from the network, and the other outputs.
  

Accuracy

• Integral Nonlinearity: ±0.012% max
• Offset ±0.05% max (0mA or 4mA)(Ta = 25°C)
• Offset Drift: 50 ppm/°C max
• Total Output Error: ±0.15% max (20mA or 24mA)(Ta = 25°C)
  Total Output Error Drift: 50 ppm/°C max
• PSRR: 10 µA/V max
• Resolution: 16 bits, 244 nA, 0.0015% of 16mA span
• Power: 7.0 to 26.0V DC, 300 mA typical at 12V DC, 280 mA standby

• DIN rail mount DC power supply. Input 115-230 VAC 50/60 Hz, Output 12 VDC, 1.5A.
• 2100 Series Connect Cable, 50 ft. (15 m). One cable end has a single connector to plug into bottom of 2100 Module. Opposite end is unterminated with six wires stripped for connection to 2108 Analog Output module, Quick Disconnect box, or other device.